Expansion of the functional composition of R10 recorder.

For use in the Registrar R10 developed and prepared for production of the new extension module “Module discrete input-output” (MVV).

 

Module discrete input-output (MVV)

Module discrete input-output (MVV)

MVV module contains 8 relay alarm outputs, similar to the MPC module and 8 isolated digital inputs. Each input can be independently programmed as part of the Registrar R10 connection logic, pulse or frequency input signals. Logical pulse or frequency input is used to connect potential signals ranging from 0 V to ± 24 V, including transistor n-p-n or p-n-p stages and types of signals “dry contact”. The range of frequencies and pulse frequency signals of 0.01 … 10,000 Hz.

State tests of Registrar R10 had finished

State tests of Registrar R10 had finished.

 

09/09/2015 p. at a meeting of Science and Technology Commission of Metrology of the Ministry of Economic Development and Trade approved the “Type of measuring equipment” Videographic / Paperless recorder R10″ and entered it into the State register of measuring instruments under the number U3637-15 (producer – LLC” Lviv Instrument Plant” c. Lvov).

It was established calibration interval and calibration interval – 3 years.

State tests of the Registrar R10

State tests of the Registrar R10

Developed and prepared for the state tests PND-01 and PND-02

Developed and prepared for testing by the State Converters normalizing differential transformer PND-01 and PND-02 for use with differential-transformer type sensors and gauges DM3583, DER-22364, MED-22365 and others.

Converters have universal inputs to any standard signal range and the conversion characteristic, as well as the function “Calibration Sensor”.

In a modification of PND-02 reached 0.1% accuracy and speed in 0.2 seconds. This allows the Registrar on the basis of video graphics technology R10 to implement multichannel system of registration and control parameters, coming completely from all types of primary probes, including diftransformatornye.

Characteristics:

  1. Input mutual inductance: 0 – (10) and mH (-10) = 0 – (10) mH.
  2. Conversion features: linear and linear-quadratic.
  3. Sensor supply current is 125 mA, frequency of 50 Hz.
  4. ccuracy: 0.5% to PND-01 and 0.1% for the PND-02.
  5. Speed ​​2 seconds PND-01 and 0.2 seconds for the PND-02
  6. Output: 4-20 mA, Modbus RTU.
  7. Conversion Options: model (the factory) and user calibration for 5-points, allowing to minimize the measurement error of a pair of sensor-transmitter.

Series production – 2016.

Release recorders KS1 and showing KP1

Release recorders КСМ1 (KSM1), КСП1 (KSP1), КСД1 (KSD1), КСУ1 (KSU1) and showing КПМ1 (KPM1), КПП1 (KPP1), КПД1 (KPD1), КПУ1 (KPU1) .

 

Recorders КС1

Recorders КС1

Showing devices КП1(KP1)

Showing devices КП1(KP1)

The exposition of LLC “LPZ” at the exhibition “Electronics. Instrument. Automation”

The exposition of LLC “LPZ” at the exhibition “Electronics. Instrument. Automation”,
c. St. Petersburg, Russian Federation.

 

We tested and put into production upgraded amplifiers U1MA, U2MA, U3MA

We tested and put into production upgraded amplifiers
У1М-01М (U1MA), У1МА-01М (U1MA), У2М-01М (U2MA), У2МА-01М (U2MA), У3М-01М (U3MA), У3МА-01М (U3MA) для приборов КС1 (KS1), КП1 (KP1), КС2 (KS2), КС3 (KS3) and КС4 (KS4).

Amplifiers У1М(U1MA), У2М(U2MA), У3М(U3MA)

Amplifiers
У1М(U1MA), У2М(U2MA), У3М(U3MA)

Amplifiers У1М(U1MA), У2М(U2MA), У3М(U3MA)

Amplifiers
У1М(U1MA), У2М(U2MA), У3М(U3MA)